English
简体中文What are the unique advantages of motorcycle lifts:
The motorcycle lift adopts standard platform guide rail, which has high linear precision and good wear resistance; the control system of the motorcycle lift adopts the standard lift control panel, liquid crystal display box, related wiring harness and connectors. The utility model has beautiful appearance and convenient operation, and can visually display the position of the board where the vehicle is located. The wiring harness is connected by a connector, and has two automatic and manual control modes.
Has high maneuverability. There are two modes of operation: automatic and manual maintenance mode. The operation program is easy to set and implement, and it is difficult to achieve automatic mode maintenance for ordinary hydraulic platforms.
Motorcycle lifts have become a popular product in the aerial work market in recent years. In order to enable customers to obtain better use effects, it is necessary to eliminate unstable factors in the use process.
The motorcycle lift is overloaded and the load must be within the rated range. Overloading does not increase productivity. On the contrary, it will seriously shorten the service life of the track elevator. The pin is faulty. Pins are important moving parts between rods. Once it cannot move freely, it will cause the orbital lift to be inflexible and disadvantageous, resulting in instability.
Hydraulic system failure, the main inspection items are to check whether the motor is running normally; check whether the blockage is related; check whether the seal is well sealed. If the electrical system is in poor contact, the main inspection items are: check whether the voltage of the rail elevator is stable; check whether the indicator light of the electric box is working properly; check whether the lifting switch is in poor contact.
Hydraulic oil for motorcycle lifts may contain large amounts of impurities. Hydraulic oil is an important medium for rail elevator operation. Therefore, if there is a large amount of impurities in the hydraulic oil, it is easy to block when it flows into the hydraulic components, resulting in unstable lift.
