What are the unique advantages of motorcycle lifts:
　　Motorcycle elevator adopts standard platform guide rail, which has high linearity precision and good wear resistance; the control system of motorcycle elevator adopts standard elevator control panel, liquid crystal display box, related wiring harness and connector. The utility model has beautiful appearance, convenient operation, visual display of the position of the board where the car is located, the wiring harness is connected by a connector, and has two automatic and manual control modes.
　　 has high maneuverability. There are two modes of operation: automatic and manual maintenance mode. The operating program is easy to set up and realize, and it is difficult to realize automatic mode maintenance for ordinary hydraulic platforms.
　　 motorcycle lifts have become a hot product in the aerial work market in recent years. In order to enable customers to obtain better use results, it is necessary to eliminate unstable factors in the use process.
　　 The motorcycle lift is overloaded, and the load must be within the rated range. Overloading will not improve work efficiency. On the contrary, it will severely shorten the service life of rail elevators. The pin is faulty. The pin is an important moving part between the rods. Once it cannot move freely, it will cause inflexible and unfavorable orbital lift, leading to instability.
　　Hydraulic system failure, the main inspection items are to check whether the motor is operating normally; check whether the blockage is related; check whether the seal is well sealed. The electrical system is in poor contact. The main inspection items are: check whether the voltage of the rail elevator is stable; check whether the indicator light of the electric box is working normally; check whether the lift switch is in poor contact.
The hydraulic oil of a motorcycle lift may contain a lot of impurities. Hydraulic oil is an important medium for the operation of rail elevators. Therefore, if there are a lot of impurities in the hydraulic oil, it is easy to block when it flows into the hydraulic components, resulting in unstable lift.